PET Crystallizers - SCR

 
Inquiry
The PET crystallizer applies crystallizing material from amorphous states to crystalline states, such as PET, PLA, etc. A characteristic of amorphous materials is that they tend to soften and agglomerate at drying temperatures, forming clumps and adhering to the walls of a drying hopper. Crystallize amorphous material prior to drying to prevent this agglomeration from occurring.
Option with the dehumidifying dryer to form a group of the crystallizing dehumidifying drying combination system.

Features

  • Fixed speed of agitator makes materials not lump together during the crystallization.
  • Simplify and improve drying efficiency.
  • Materials can be dried under high temperature to improve drying efficiency.
  • Cyclone dust collector is standard, which is applied to dust-rich place. Can effectively reduce the load on filter bag, and reduce the number of times of filter bag cleaning, thus extend the life span of the filter bag.
  • With double overheat protector, it can reduce the possibility of either mechanical or man-made problems.
  • Equipped with rotary valve with good sealing performance, which can output crystallized material accurately.
  • Equipped with material level switch, which can detect material level accurately and make operation reliable.
  • Equipped with negative pressure tester(excluding SCR-1600U) to immediately test the ventilation of the filter. Give an alarm when the negative pressure is higher than the setting value, clean the filter to avoid blockage.

Contact

If you can not find the information you need, please contact us.