Mould Temperature Controller
STM series mould temperature controllers work with heat transfer oil as a heat transfer medium, which heats the mould and maintains its temperature for the right injection process. The series comes in three maximum temperature models: standard, high, and ultra-high temperature models. The standard model has a maximum working temperature of 200°C, the high model has a maximum working temperature of 300°C, and the ultra-high model has a maximum working temperature of 350°C.
The heated oil is returned from the mould to the tank with cooling coils, and the oil can be chilled by indirect cooling with water. The high-pressure pump pressurizes the oil to the heating tank and the mould at a steady temperature with a precision of ±1℃. Hence, they can be used in other similar applications.
The heated oil is returned from the mould to the tank with cooling coils, and the oil can be chilled by indirect cooling with water. The high-pressure pump pressurizes the oil to the heating tank and the mould at a steady temperature with a precision of ±1℃. Hence, they can be used in other similar applications.
Features
- For standard STM, the maximum heating temperature can reach up to 200℃/392℉, while the maximum heating temperature of STM-HT can reach 300℃/572℉.
- P.I.D controller with 4.3" LCD with a intuitive and user-friendly interface.
- Weekly timer with ℃/℉ unit conversion.
- Adopt digital P.I.D. multi-stage controller can maintain stable mould temperature with a precision of ±0.5℃/0.9oF.
- SSR solid state relay
- STM in build an efficient high temperature pump. STM-HT is equipped with magnetic pump, and the interior is made of stainless steel for high pressure explosion-proof without leakage;
- In build multiple safety plus warning devices, such as reverse phase, pump overload, overheat, and low oil level alarm.
- Stainless steel pipe heater.
- Standard equipped with flow display and pump reverse function for oil return.
- RS485 communication interface achieves centralized monitoring with the host.
- Standard buzzer
- Displays of mould temperature and return oil temperature of mould are optional, and add “TS” at the end of the model code.
- For models optional with magnetic pump (excluded for STM-3650 and STM-D models), add “M” at the end of the model code.
- It could option with magnetic filter to prolong service life of magnetic pump (only suitable for models with magnetic pump). Add “MF” at the end of the model code.